After the router and printer exchange information, the printer accepts the security and configuration information from the router and connects to the network. It automatically connects when you push a button on the router and on the printer. PBC (Push Button Connection) is the easiest way to connect the printer to a wireless network. Use the PBC or PIN method to connect to a WPS wireless network. Method 2: Connect to a Network with a Wi-Fi Protected Setup (WPS)
Wps pin on router password#
Wps pin on router serial number#
Note: Depending on when the device was manufactured, the default password may be the device serial number or 1111. Type the administrator password, then touch OK.At the printer control panel, log in as a system administrator.Method 1: Connect to a Wireless Network using the Wi-Fi Wizard on the Touch Screen For assistance, contact your system administrator.
Before starting, obtain the router setup and configuration information, such as name and passphrase. Method 3: Connect to a Wireless Network Manually - When connecting to a wireless network that does not include a WPS-compliant router, set up and configure the printer manually.To use the tools, ensure that the wireless router is configured properly and is compliant with the WPS. With a WPS-certified router, you can use tools in the router and the printer to connect the printer to the network. The WPS protocols enable you to set up devices in a secure wireless network without having wireless networking experience. Method 2: Connect to a Network with a Wi-Fi Protected Setup (WPS) - Wi-Fi Protected Setup (WPS) is a network standard for setting up a wireless network.If the network requires a password, the machine will request the password when you select the network. Method 1: Connect to a Wireless Network using the Wi-Fi Wizard - The printer will display a list of available wireless networks.After the adapter is installed, remove it only as needed, and as directed in the Wireless Network Adapter removal instructions.Īfter the Wireless Network Adapter has been installed, configure the printer to connect to the wireless network using one of the following methods.
Wps pin on router install#
To install the Wireless Network Adapter, follow the instructions provided with the Wireless Network Adapter.Ĭaution: Pulling on the adapter can cause damage.Remove the packaging from the Wireless Network Adapter.Open the front door, then press the main power switch to the Off position.At the control panel, press the Power/Wake button, then touch Power Off.
After the adapter is installed, and wireless networking is enabled and configured, the adapter is able to connect to a wireless network. The optional wireless network adapter plugs in to the back of the control board. Perform the following to connect to a wireless network: Note: Wireless networking is available only on printers with the optional Wireless Network Adapter installed. Before connecting the printer to a wireless network, the wireless router must be configured with a service set identifier (SSID) and any necessary credentials. The printer can connect to a wireless LAN that includes a wireless router or wireless access point. DocuShare Enterprise Content ManagementĪ wireless local area network (WLAN) provides the means to connect 2 or more devices in a LAN without a physical connection.
0 kommentar(er)
